Thursday, June 2, 2011

Does anyone know how to change the starter on a 1986 350 four trx?

The hardest part is remembering how the sepentine belt goes back on. Draw yourself a diagram. One of the pulleys the belt rides on is a tensioning pulley. If you pull on it with a wrench it moves the whole pulley and makes the belt loose. Remove the belt. There is a wiring harness that connects to the starter. Remove these wires. There should be 2 bolts that mount your starter to a bracket which is mounted to your engine. Remove these bolts and pull the old starter out. Bolt down the new starter. Attach the wiring harness. Using your drawing on where the belt goes replace the belt. You will need to move the tensioning pulley with a wrench again to get the belt back on. This assembly is self adjusting. You're done!

No comments:

Post a Comment