Saturday, November 20, 2010

Diagrams On How To Change Starters On A 93 3.1 V6 Engine For A 93 Olds Cutlass Supreme that is free?

Must be pretty much free. I don't have any time to go to a library or buy one right now. So if anyone can tell me where to find one online so I can easily view it and print. Thank you so much.Diagrams On How To Change Starters On A 93 3.1 V6 Engine For A 93 Olds Cutlass Supreme that is free?
Disconnect your negative battery cable. Raise the front of the car. You will find the starter next to oil pan, between the engine and the radiator, just above the front undercarriage. Remove the batter cable and wires from the front of the starter. Remove the plastic cover at the back of the starter. There are 3 bolts in this plastic cover. One of the bolts goes into the side of the transmission. The other 2 go into the bottom of the plastic cover, and cover the bottom of the flywheel. When this is removed you will see the two bolts that go straight up into the engine block that hold the starter in place. On the front of the starter is a bracket. Take the bolt out of the starter that holds the starter to this bracket. Remove the bolt from the other end of the bracket where it bolts to the engine. Somewhat of a pain to get around the AC compressor to get this bolt out. Remove the two bolts at the back of the starter and it will fall in your lap. You may need a 6%26quot; extension on your socket to get to the bolt that has the front cross member in the way. Just reverse this to install the new one. Good luck.Diagrams On How To Change Starters On A 93 3.1 V6 Engine For A 93 Olds Cutlass Supreme that is free?
Hi try autozone.com , they have pretty detailed instructions on numerous items with exploded diagrams and etc..

Hope this helps

No comments:

Post a Comment